|
|||||||||
 |
|
||||||||
|
|
||||||||||||||
| . 网站首页 . 新闻 . 新品 . 方案 . 专访 . 活动 . DSP . EDA . 评测室 . 技术文库 . 会员区 . 商城 . 服务导航 . 邮购 . 资源 . | ||
 |
||
|
||
|
|||||
| NXP PNX0161单片USB音频解决方案 | |||||
作者：NXP 文章来源：本站原创 点击数： 更新时间：2007-9-3  |
|||||
|
The NXP Nexperia low-power USB audio device PNX0161 is a single-chip solution for digital, USB Audio-based headset accessories. It moves the core digital headset functions to the USB connector of a mobile/portable device, so the connector performs battery charging, PC synchronization, and headset This small, low-power, and fully USB-compliant IC makes it easy to build digital-headset accessories for mobile/portable devices. It provides stereo playback and recording, with optional FM radio, across a USB link operations. In this way, manufacturers can deliver systems with just a USB connector, and thereby simplify their designs, shrink footprint, and reduce cost. Available in a small TFBGA88 package (7 x 7 mm), it builds on the USB standard to provide audio playback and recording functionality that is directly powered by the USB bus. The PNX0161 is fully compliant with USB specifications, so it provides plug-and-play operation with any USB host or On-The-Go (OTG) device. It supports USB Audio and Human Interface Device (HID) Classes, and requires very little power (~10 mA at Vbus) for playback mode. When connected to a USB host or OTG device, a headset based on the PNX0161 is powered by the USB physical bus. The host streams digital audio to the PNX0161-based headset accessory, synchronizes it to the local clock to prevent audio artifacts (sample rate conversion), and converts the resulting signal to analog. The headset accessory can capture audio from a microphone, line input, or tuner, and can convert it to a digital USB Audio stream that is subsequently streamed to the host. 主要特性: Full-speed (12 Mbps) USB device fully compliant with USB host or USB OTG Single-chip solution for USB headset USB bus powered (Vbus at 5 V) Low power consumption (~10 mA at Vbus) High suppression of phone noise Stereo record and playback at sample rate of 48 kHz USB Audio and HID Classes FM radio via low-power analog bypass mode ARM7TDMI core with on-chip SRAM, ROM,and optional NOR Flash Wide range of connectivity and audio interfaces Intelligent power management Available in two versions: programmable Flash or cost-effective ROM 88-pin TFBGA package (7 x 7 mm with 0.5-mm pitch) 高度集成的硬件和软件: The PNX0161 is a fully programmable solution that uses an ARM7TDMI core with an embedded DC/DC converter that is powered through the USB bus. There is 256 kB of on-chip NOR Flash, 32 kB of SRAM, and 32 kB of boot ROM. For added power savings, there is embedded power-management functionality, plus intelligent power and DMA control. The PNX0161 is specially designed to suppress noise coming from the host (e.g. GSM noise). The IC includes I2S input and output interfaces, a fast UART with DMA support, a master/slave I2C-bus interface, a 24-bit stereo ADC with programmable amplifier (for microphone, line input, and tuner input), a microphone bias block, and a 24-bit stereo DAC with a Class AB headphone amplifier for high-quality audio. Stereo recording and playback operate at a sample rate of 48 kHz. There is USB Audio streaming, full support for HID Class, USB Device Firmware Upgrade, and audio post-processing features like volume control and optionally other sound features. The PNX0161 is available in two versions – programmable Flash or cost-effective ROM – that can be switched seamlessly during product ramp-ups. PNX0161方框图:  PNX0161应用电路图:  详情请上网: http://www.nxp.com/acrobat_download/literature/9397/75015981.pdf |
|||||
| 欢迎点击进入：TI德州中文网 (国内唯一针对TI应用的中文技术网站) 文章录入：admin 责任编辑：admin | |||||
| 【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 | |||||
| 网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！） |
| | 设为首页 | 加入收藏 | 联系站长 | 友情链接 | 版权申明 | 网站公告 | 管理登录 | | |||
|
