|
|||||||||
 |
|
||||||||
|
|
||||||||||||||
| . 网站首页 . 新品速递 . 业界新闻 . 活动专访 . 解决方案 . 技术文库 . DSP设计 . 电机控制 . 前沿科技 . 下载中心 . 商城 . 服务导航 . 邮购须知 . | ||
 |
||
|
||
|
|||||
| Conexant CX25853多路视频参考设计 | |||||
作者：Conexant 文章来源：Conexant 点击数： 更新时间：2009-4-3  |
|||||
|
Multi-Channel Video Decoder CX25850/1/3 High Quality Integrated Video Surveillance System Front-End The CX25850/1/3 multi-channel video decoder devices contain fast locking and low signal locking features designed specifically for the video surveillance market. The CX25850 and CX25851 both integrate four analog video decoders, each with a high-performance 10-bit ADC, full 10-bit data path through the decoder, and independent scaling. Eight composite video inputs allow the user to multiplex between two cameras on each video decoder input. The CX25853 integrates eight of the same high quality decoders and sixteen composite video inputs. The CX25850/1/3 also contains two analog video encoders and a digital monitor output port. All three devices support BT.656 digital video interfaces. The CX25851 also supports Synchronous Pixel Interface (SPI) digital video interfaces. All devices are designed for PC-based and embedded/stand-alone security Digital Video Recorders (DVRs). Flexible Architecture With two composite input ports per decoder, the CX25850/1 supports direct connections for eight cameras, and the CX25853 supports sixteen cameras. This eliminates the need for external video multiplexers in systems where two cameras share a video decoder. Additionally, the CX25850/1/3 contains two on-board, high quality analog video encoders with dedicated BT.656 input pins. Alternatively, these encoders may be driven by streams internal to the device. These encoders provide surveillance DVR manufacturers with a convenient way of driving external monitors. When connected to the monitor output port, the CX25850/1/3 offers users the opportunity to “scroll” between decoder outputs at fixed intervals and/or switch to view a specific decoder output. Ease of Use The CX25850/1/3 requires minimal programming for startup using an I2C serial protocol. The devices are preconfigured in a default mode for development, verification, and fast prototyping. The fast locking and low signal locking features were developed and optimized specifically for the video surveillance market. Fast locking ensures that each decoder within the CX25850/1/3 will lock to a new/switched input within one field, a feature that is useful in multiplexed camera systems. Low signal locking ensures that each decoder within the CX25850/1/3 will lock to composite signals as low as 100 mV peak-to-peak, a feature that helps in systems where cameras and feeds are not perfectly terminated. Integrated Filters All video inputs have integrated anti-alias filters, eliminating the need for external filter components. These filters help improve the video decoding process by removing aliasing artifacts prior to the digitization process. Conexant employs a proprietary method of luma-chroma separation of the composite video sources to ensure optimum video quality. Distinguishing Features Integrated NTSC/PAL video decoding and encoding 10-bit ADCs and DACs Analog composite video interfaces Multiple video decoders with 2 analog composite inputs per decoder Fast locking (<1 field) and low signal locking (100mVp-p) Independent scaling on each video decoder path BT.656/VIP digital interfaces Dedicated monitor output programmable to switch between decoder paths and/or cascade multiple devices together Integrated anti-alias filters On-chip voltage regulator 20mm X 20mm eTQFP package and 13mm x 13mm fpBGA package (CX25850) 28mm X 28mm eLQFP package (CX25851) 28mm X 28mm eLQFP package and 19mm x 19mm fpBGA package (CX25853)  图1.CX25850/1/3方框图 基于Conexant CX25851/3和Maxim MG3500的视频解决方案 Solution based on Conexant’s CX25853, CX25821, and Maxim’s MG3500 Conexant Systems and Maxim Integrated Products have jointly developed this PCIe-based reference design for PC-based video surveillance products with Digital Video Recording (DVR) capabilities. The reference design enables a complete solution for video surveillance DVR applications and provides up to 16 channels of H.264 compression at D1 resolution. This comprehensive hardware and software design platform gives video surveillance product manufacturers a powerful, cost-effective solution to quickly deliver products to market. The solution is made possible with Conexant’s CX25853 Multi-Channel Video Decoder, CX25821 PCI-Express Media Bridge, Maxim’s MG3500 HD H.264 Video Codec, and Lattice FPGAs. Conexant’s CX25853 is the world’s first eight-channel video decoder. The chip enables multiple analog video streams to be captured and compressed simultaneously. The decoder features a high-performance 10-bit ADC, full 10-bit data path through the decoder, independent scaling, two analog video encoders, and digital monitor output port. The decoder supports BT.656/VIP digital video interfaces and provides high-quality eight-channel integrated NTSC/PAL decoding with 5-line comb filtering. Key features include the capability to lock to low-level video signals, horizontal and vertical scaling, and hue, brightness, saturation, and contrast controls. The chip’s high-density architecture lowers per-channel decoder costs by as much as 35 percent, and substantially reduces board space requirements compared to using two separate four-channel devices. This reference design uses two CX25853 devices to provide up to 16 channels of real-time video decoding. Media bridging is handled with Conexant’s companion CX25821 device, which enables multi-channel, bi-directional digital audio and video transfers to a host computer via an integrated PCIe interface. The CX25821 bridges both uncompressed (from CX25853) and compressed (from Maxim MG3500) data in this design. The dual-path architecture allows system designers to optimize PC-DVR system architecture and resources. The uncompressed data may be used for real-time monitoring and/or video analytics, while the compressed data may be sent directly for storage and retrieved independently for playback. Video compression is performed by Maxim’s MG3500 H.264 Video Codec, a highly integrated, low-power System-on-Chip (SoC), which increases recording capacity on DVRs. Each MG3500 supports up to four channels of low-latency full D1 video compression. Key technical capabilities include digital image stabilization, motion detection, object tracking, scene change detection, privacy region protection, and digital time stamps. The SoC performs de-interlacing, scaling, and tiling to produce high quality images with flexible displays and resolutions. This reference design also includes Lattice FPGAs, which perform key video format conversions. The combination of the CX25853, CX25821 and MG3500 SoCs provide video surveillance product manufacturers with the perfect solution for PC-based DVR video surveillance applications and advanced security networks that require hardware-based compression.  图2.解决方案外形图 Distinguishing Features Complete solution for real-time video surveillance DVRs Low price per channel Small PCB area Integrated NTSC/PAL video decoding and encoding Up to 16 channels of hardware-based H.264 compression and bridging to PCIe Up to 16 channels of uncompressed video bridging to PCIe PCIe 1.1 compliant High quality images with flexible displays and resolutions Windows and Linux drivers Quick time to market Conexant CX25853 Integrated eight-channel video decoder: Low price per channel and small PCB area 5-line comb filter: Excellent luma/chroma separation for best image quality and compression efficiency Low-signal locking: Fewer amplifiers required in overall system Conexant CX25821 Multiple channels of BT.656 and I2S bridging to PCIe: More cost-effective than Field-Programmable Gate Arrays (FPGAs) MG3500 host-interface: Allows bridging of H.264 compressed data to PCIe Windows and Linux drivers Maxim MG3500 Multi-channel H.264 compression, up to four channels per device: Low price per channel and small PCB area De-interlacing, scaling, and tiling: High quality images with flexible displays and resolutions Compressed and Uncompressed outputs: Separate paths for recording and monitoring  图3.采用CX25851/3和MG3500的8/16路PCIe捕捉卡参考设计方框图 详情请见: http://www.conexant.com/servlets/DownloadServlet/PBR-201225-004.pdf?docid=1226&revid=4 和 http://www.conexant.com/servlets/DownloadServlet/RED-202183-001.pdf?docid=2184&revid=1 |
|||||
| 欢迎点击进入：TI德州中文网 (国内唯一针对TI应用的中文技术网站) 文章录入：admin 责任编辑：admin | |||||
| 【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 | |||||
| 最新热点 | 最新推荐 | 相关文章 | ||
| Conexant CX25858 8路音视频… Conexant CX2310x USB广播音… Conexant CX92235彩色激光打… Conexant CX9543x传真通信方… |
| 网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！） |
| | 设为首页 | 加入收藏 | 联系站长 | 友情链接 | 版权申明 | 网站公告 | 管理登录 | | |||
|
