|
|||||||||
 |
|
||||||||
|
|
||||||||||||||
| . 网站首页 . 新闻 . 新品 . 方案 . 专访 . 活动 . DSP . EDA . 评测室 . 技术文库 . 会员区 . 商城 . 服务导航 . 邮购 . 资源 . | ||
 |
||
|
||
|
|||||
| Altera VGA 控制器和Nios II 参考设计 | |||||
作者：Altera 文章来源：本站 点击数： 更新时间：2007-4-24  |
|||||
|
This reference design demonstrates how to interface an Altera Nios II processor to a VGA display using a DMA-enabled VGA controller. The design contains a complete SOPC Builder-based hardware system and software that exercises the VGA controller and displays images to a VGA monitor. Demonstrated Altera Technology The reference design demonstrates the following Altera technology: Nios II embedded processors SOPC Builder Cyclone II devices Stratix devices Board Support The reference design supports two Nios II development boards: Nios II Development Board, Cyclone II Edition Nios II Development Board, Stratix II RoHS Edition This design also requires the use of the Lancelot daughtercard if you wish to display to a VGA monitor. The Lancelot card features a Texas Instruments THS8134 video digital-to-analog converter (DAC) with a VGA output connector, allowing you to display directly to a monitor. The Lancelot card attaches to the prototype headers of Nios II development boards. The card is available from Microtronix at http://www.microtronix.com/product_lancelot.html(外形图,性能和电路图见下图) Hardware Design The hardware portion of the reference design is created in SOPC Builder. The design contains a Nios II CPU, a VGA controller peripheral, and a minimal set of components required for simple VGA display. The VGA controller peripheral is capable of displaying the following resolutions: 640 x 480 800 x 600 1024 x 768 All resolutions can be displayed in either 16- or 24-bit color. Resolution and color depth settings are configurable in the VGA Controller configuration wizard in SOPC Builder. Software Design The software portion of the design is a simple application that demonstrates how to initialize the VGA controller, and then begins writing graphics data to the VGA display. The software source includes a small graphics library capable of displaying text, lines, and simple shapes. The graphics library is demonstrated by rotating a multi-colored cube on the VGA display. Hardware Design Specifications Board support Nios Development Board, Cyclone II edition Nios Development Board, Stratix II RoHS edition Nios II/f CPU core, 4 Kbytes I-cache, 4 Kbytes D-cache—1 System timer—1 On-chip RAM—1 Kbyte Off-chip synchronous SRAM—1 Mbyte Common flash interface (CFI) flash memory interface—8 Mbytes SDRAM controller—32 Mbytes JTAG UART—1 System ID peripheral—1 PLL—2 Block Diagram Figure 1. Nios II VGA System Block Diagram  Reference Design Files The reference design is downloadable as a ZIP file. The ZIP file contains all the necessary hardware and software files to reproduce the example, as well as a readme.txt file. The readme.txt file contains instructions for re-building and running the design. The VGA controller SOPC Builder component is included in the VGA_Controller directory of the extracted project. Inside the VGA_Controller directory, there is a sub-directory named doc, which contains a block diagram and documentation for the VGA Controller component. Figure 1 for a block diagram of the VGA Controller.  The card is available from Microtronix at http://www.microtronix.com/product_lancelot.html (外形图,性能和电路图见下图)  Performance Capabilities 24-bit RAMDAC VGA connector Stereo Audio Connector 2 PS/2 connectors Display an image up to 1024x768 pixels Core written in VHDL Comes with reference designs demos 详见: 1.VGA控制器板卡电路图 2.采用Altera NiosII的VGA视频控制器 |
|||||
| 欢迎点击进入：TI德州中文网 (国内唯一针对TI应用的中文技术网站) 文章录入：admin 责任编辑：admin | |||||
| 【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 | |||||
| 网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！） |
| | 设为首页 | 加入收藏 | 联系站长 | 友情链接 | 版权申明 | 网站公告 | 管理登录 | | |||
|
