ucos-lwip-c6x-src-1.1.0_for_C6713_DSK

uC/OS-II & lwIP ports for TI C6000 DSP
Copyright (c) 2004,2005 Engineering Physics Department of Tsinghua University
All Rights Reserved.

See the files COPYRIGHT, COPYRIGHT-lwIP and COPYRIGHT-uCOS-II for
distribution conditions and official warranty disclaimer.

PLEASE NOTE: THIS SOFTWARE IS BEING MADE AVAILABLE ``AS-IS''.
Engineering Physics Department of Tsinghua University is making this work
available so that other people can use it, but we make no warranties that
it will work for you. 

INTRODUCTION
---------------
TI C6000 DSPs  were widely used for image processing with network.

With this project we want to build up a "free" solution for this kind of applications,
which includes realtime OS kernel "uC/OS-II" and a TCP/IP stack "lwIP".

The sourcecode was built in TI CCS (CodeComposer Studio) v2.20.00, the project file was in path "\TI_C6711\TEST\"

There was also a examples in this project:
 "HTTP"     - in file "sample_http.c"

WHAT SYSTEMS DOES IT RUNS ON?
--------------------------------

*** This releas is specially built for TI C6713 DSK. (DSP Starter Kit). ***

The ethernet port was based on a 10/100M Ethernet Daughtercard designed by Zeng Ming(zengming99@mails.tsinghua.edu.cn).
The schematic of this daughtercard was provided for free, as part of this project.

TIPS
-----
* This project was built on TI TMS320C6713 DSK. The uC/OS-II should be the same for TI C6000 series DSPs,
  but some codes was only suitable for C6711 DSK (like "\TI_C6711\TEST\boot.asm").
  If you want to use these codes in your own project, you should rewrite this part.
 
  This part of codes managed the boot of the target board, and howto burn the flash rom.

* The Daughtercard was designed with the compatibility of TI's official document ”TMS320 Cross-Platform
  Daughtercard Specification”. So it could be applicable for all types of DSKs and EVMs manufactured by TI.

  But, some code should be rewrote on a new DSK or EVM target.

Share and Enjoy,
The Development Team